OPTION SELECTOR BUllONS CYCLE CONTROL KNOB
Selecting a cycle
POTS b PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63?CJ in both
washes and the last rinse (marked ?1.
Cycle time will be about V/Z to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 60
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 55 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 50
minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 10 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
HI-TEMP WASHING Option
When this option is selected, water for the parts of the cycle will be longer if the water is
main wash and the final rinse is heated tol45? F heated. HI-TEMP washing is automatic in POTS &
(63? C). Washing and rinsing action in those PANS.
save energy, but dishes take longerto dry [over-
The AIR DRY Option
night) and some water spotting may result.
Air in the dishwasher is automatically heated Some items (such as plastics] may need towel
during the ?dry? part of all cycles. drying.
If the AIR DRY Optlon is selected, air in the
For best results, use a liquid rinse aid such as
dishwasher is not heated. Using this option helps Jet-Dry?
9 |
ACEC
