UNDERCOUNTER START-UP GUIDE
Before using your dishwasher, remove all packaging materials. 3. Add detergent and check the rinse aid dispenser. Add rinse
Read this entire Use and Care Guide. You will find important aid if needed. (See ?Dishwasher Use.?)
safety information and useful operating tips.
Using Your New Dishwasher
4. Push door firmly closed. The door latches automatically. Run
hot water at the sink nearest your dishwasher until the water
is hot. (See ?Dishwasher Efficiency Tips.?) Turn off water.
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
5. Select a drying option.
Doing so can result in serious injury or cuts.NOTE: Use No Heat Dry for the Rinse Only cycle.
6. For Series 840 and 850: Press the desired cycle and option
selections. (See ?Dishwasher Use.?) Turn the cycle control
knob to the desired cycle to start.
Electrical Shock HazardStopping Your Dishwasher
You can stop your dishwasher anytime during a cycle.
Electrically ground dishwasher.
1. Open the door slightly.
Connect ground wire to green ground connector
2. Wait for the spraying action to stop. Then open the door all
in terminal box.the way, if needed.
3. Close the door to continue the cycle.
Do not use an extension cord.
OR
Failure to follow these instructions can result in
1. Turn the cycle control knob slowly clockwise until you hear
death, fire, or electrical shock.
water draining. Let the dishwasher drain completely.
2. Open the door.
1. Scrape large food soil and hard items (toothpicks or bones)
3. Turn the cycle control knob to Off.
from dishes.
2. Properly load the dishwasher. (See ?Dishwasher Loading.?)
Make sure nothing prevents the spray arm(s) from spinning
freely.
7 |
ACEC
