Connecting the faucet adapter to faucets with
internal threads
CONNECTING YOUR Insert the two screens, the thin washer, and then the thick washer
from the faucet adapter kit into the faucet adapter. Attach the
adapter onto the end of the faucet.
PORTABLE DISHWASHER
Connecting the Faucet Adapter
NOTE: A special adapter must be installed on the faucet before
the dishwasher can be connected. Complete Installation
Instructions and the adapter are packed with your dishwasher.
(See the Installation Instructions.)
When moving your dishwasher, make sure the door is latched. 1. Thick washer
Hold the dishwasher at the top front corners.2. Thin washer
3. Screens
Preparing the faucet4. Faucet adapter
1. Remove the screen holder or aerator, screen, and washer
from the end of the faucet.NOTE: Use both washers.
2. Use the faucet adapter kit that came with your portable
dishwasher to modify the faucet where the dishwasher will be Connecting to Water and Electrical Supply
used.
1. Run water at the faucet until it is hot. Turn the water off.
2. Pull the hoses out of their storage compartment on the back
of the dishwasher.
1. Washer
2. ScreenNOTE: Make sure the hoses are not kinked or twisted. Kinked
3. Screen holder or aeratorhoses reduce washing performance.
3. Pull down on the locking collar while lifting the hose
NOTE: Remove and save the washer, screen, and screen holder connector onto the faucet adapter.
or aerator for future use.
Connecting the faucet adapter to faucets with
external threads
Insert the two screens and then the thin washer from the faucet
adapter kit into the faucet adapter. Attach the adapter onto the
end of the faucet.
1. Faucet adapter
2. Locking collar
3. Hose connector
4. When the connector snaps into place, release the locking
collar.
5. Turn the hot water on slowly until it is all the way on.
1. Thin washer
2. Screens6. Plug into a grounded 3 prong outlet.
3. Faucet adapter
NOTE: Do not use the thick washer.
9 |
ACEC
