Starting a wash cycle
1. Load the dishwasher. See the ?Loading 6. Run hot water at the sink nearest the dish
Your Dishwasher? section. washer until water is hot. Turn
water off. (See the ?Caring for
Your Dishwasher? section.)
2. Spin the spray arms. They should 7. Press a Cycle pad. If desired, press one
turn freely. or more Option pads. (See the
fiFs,pr ?Setting the Controls? section.)
The indicator above each pad
will show red when selected.
Eil NOTE: More than one cycle
shares the same pad. The cycle control
3. Add detergent. See the ?Using the knob determines which cycle operates.
detergent dispenser? section.
ycle control knob clockwise to
the desired cycle. You will feel
a definite ?stop? at each cycle
mark. The dishwasher auto-
matically starts the cycle
4. Add rinse agent, if needed.
you select.
NOTE: If the door is latched, you will hear
the cycles start and stop as the control
knob passes each cycle mark. This is
normal and does not hurt the dishwasher.
If you prefer, you can set the cycle control
5. Close door firmly until it latches. knob with the door unlatched.
Stopping the dishwasher
You can stop your dishwasher anytime l Turn the cycle control knob slowly clock-
during a cycle. All you have to do is: wise until you hear water draining. Let the
l Open the door slightly. Wait for any filling dishwasher drain completely. Then open
or spraying action to stop before opening the door and turn the cycle control knob
to off.
the door all the way. Close the door to
continue the cycle.
OR
7 |
ACEC
