Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or to
clear the indicators.
To cancel a cycle:
l Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
?Changing a cycle or option setting? section.)
l You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
Selecting cycle options
You can press an Option pad after the Air Dry
dishwasher starts as long as the cycle is not When Air Dry is selected, the air in the
past the point that the option is used. For dishwasher is not heated during
example, you can press Air Dry anytime the ?dry? portion of a cycle.
before the Drying indicator glows. Using Air Dry helps save
. ,.
After a wash cycle, the dishwasher energy, but dishes take longer to
remembers the chosen options and uses the M dry and some spotting can occur.
same options in the next wash cycle unless Some items (such as plastics) may need
new options are selected or the Cancel/ towel drying. For best drying, use a liquid
Drain pad is pressed. rinse agent.
NOTE: The dishwasher automatically
High Temp Wash
heats the air in the dishwasher during the
When Hi< jh Temp Wash is selected, the ?dry? portion of the cycle unless you select
dishwasher heats the water
Air Dry.
during the main wash of the Low
Energy/China and Normal cycles.
Heating the water helps improve
washing results. The Pots-N-Pans
cycle automatically uses High Temp Wash.
14 |
ACEC
