Starting your dishwasher
The controls are built into the control panel on When dishes are loaded and ready to be
the dishwasher door. Five program pads and washed...
the electronic display allow you to program 1. Spin the Upper Spray Arm to make sure noth-
and monitor the dishwasher?s operation. ing will stop it from turning.
2. Close and latch the door.
When first installed, ?PF? will show on the display.
3. Run hot water at the sink nearest the dish-
Press CANCEL Pad twice to clear the display. To
washer until it is hot.
startthe dishwasher, press the SELECT PROGRAM
4. Select a desired Program by touching the
Pad.The dishwasher is pre-programmed for the
SELECT PROGRAM Pad.
NORMAL Program with the AIR DRY Option. If you
5. Select an Option by touching the SELECT
want this program, touch START.To select a differ-
OPTION Pad.
ent program and/or option, just touch the SELECT
6. Touch START Pad.
PROGRAM Pad and/or SELECT OPTION Pad until
the program and/or option you desire appears
in the display.The display will showthe next pro-
gram or option each time the pad is touched.
After each use, the dishwasher remembers the
program and options used.
Selecting a program
POTS & PANS
WASH AND HEAT RINSE AND HEAT CLEAN
Maximum cleaning for cooked-on WATER INDICATORS WATER INDICATORS INDlCATOR
or baked-on foods. The program
0-A
time delays while the dishwasher
automatically heats the water to
145°F (63°C) in both washes and the
last rinse (marked l ). Program time is
63 minutes plus the time needed to
The CLEAN Indicator always comes on during or after dry,
heat the water.
deoendino on the ontion used. See PaaelO for exDlanation.
WASH INDICATOR RINSE INDICATOR CLEAN INDICATOR
HEAVY
A double wash for heavily soiled
loads. Program time is 67 minutes.
NORMAL WASH INDICATOR RINSE INDICATOR CLEAN INDICATOR
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this program.) Program
time is 73 minutes. Water is heated
during the first rinse.
LOW ENERGY WASH RINSE INDICATOR CLEAN INDICATOR
INDICATOR ,_w. /.h-.
For pre-rinsed or lightly soiled loads.
Program time is 56 minutes.
RINSE INDICATOR
RINSE
For rinsing a few items to be washed
one or more days later, Program
time is 12 minutes. |
ACEC
