4. Level the freezer from side to side and front to back so that
the lid will seal properly. Use shims to level the freezer if
necessary.FREEZER USE
Using the Control
Turn the freezer temperature control to 4. This setting is designed
5. Allow at least 3" (7.5 cm) of air space on both sides of the to maintain the temperature at or near 0°F (-17.8°C) under normal
freezer and 2" (5 cm) between the back of the freezer and the operating conditions.
wall. Leave room above the freezer to open the lid.Allow the freezer to cool 6 to 8 hours before filling with frozen
food. Let the freezer cool overnight before adding large amounts
of unfrozen food. Never add more than 2 to 3 lbs (0.907 to
1.360 kg) of unfrozen food per cubic foot of freezer space.
2" (5 cm)
§3" (7.5 cm)
6. It should not be necessary to remove the lid during
installation. If, for any reason, the hinges need adjustment,
contact a designated service company.
NOTE: Do not cover the freezer with items such as blankets,
sheets, tablecloths, etc. This reduces air circulation.
NOTE: When the freezer is first started, the compressor will run
Electrical Requirementsconstantly until the cabinet is cooled. It may take 6 to 8 hours (or
longer), depending on room temperature and the number of times
the freezer lid is opened.
WARNING
After the cabinet is cooled, the compressor will turn on and off as
needed to keep the freezer at the proper temperature.
The outside of your freezer may feel warm. This is normal. The
freezer?s design and main function is to remove heat from
packages and air space inside the freezer. The heat is transferred
to the room air, making the outside of the freezer feel warm.
Electrical Shock HazardAdjusting the Control
Plug into a grounded 3 prong outlet.
Turn control to a higher number for colder temperatures.
Do not remove ground prong.
Turn control to a lower number for less cold temperatures.
Do not use an adapter.
Do not use an extension cord.Temperature Alarm (on some models)
Failure to follow these instructions can result in death, The temperature alarm is located above the temperature control
fire, or electrical shock.and sounds an audible alarm if the temperature reaches
10°F(-12°C) or more above normal for the selected setting. The
Recommended grounding methodalarm is controlled by a three position switch.
A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your freezer be provided. Use an outlet that
cannot be turned off by a switch or pull chain. Do not use an
extension cord.
Defrost Drain Cover
(on some models)
1. Remove defrost drain cover from the literature package.
2. Push drain cover into drain hole as illustrated.
0Prevents the alarm from sounding when the freezer
is warm, such during start-up or defrosting.
Tests the alarm regardless of temperature.
1The proper setting for normal freezer use.
To change the temperature alarm setting, move the switch from
one setting to another.
4 |
ACEC
