Style 2 - Contour
Reverse Doors (optional)Graphics follow these instructions.
IMPORTANT: If you want to reverse your doors so that they open
in the opposite direction, follow these steps. If you are not
reversing the doors, see ?Replace Doors and Hinges.?
Round-HeadDoor HandleDoor Hinge
Style 1 - StandardHandle ScrewScrew Hole PlugHole Plug
Graphics follow these instructions.
Cabinet
1. Remove uD??" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and Door Stop ScrewDoor Hinge Hole Plug
move them to opposite side hinge holes as shown. See
Graphic 1-2.
Doors
Door Handle Sealing ScrewCabinet Hinge Hole Plug
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side as shown. See Graphic 2.
2. Remove door stop from both the freezer and refrigerator
Flat-Head Handle ScrewDoor Handle Screw Coverdoors and move to the other side. See Graphic 3.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.Door Handle Seal Screw Front Round-Head Handle Screw
Cabinet1. Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the refrigerator door.
1. Remove uD??" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
2. Remove cabinet hinge hole plugs from cabinet top and
move them to opposite side hinge holes as shown. to hold the doors in place while you are working.
See Graphic 1-2.2. Assemble the parts for the center hinge as shown and tighten
Freezer doorall screws. See Center Hinge graphic. Replace the freezer
door.
1. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 2.3. Assemble the parts for the top hinge as shown. See Top Hinge
graphic. Do not tighten screws completely.
2. Remove door hinge hole plug. Move to opposite side as
shown. See Graphic 3.4. Line up the doors so that the bottom of the freezer door aligns
evenly with the top of the refrigerator door. Tighten all screws.
3. Remove door handle sealing screws. Move to opposite side of
freezer door as shown. See Graphic 4.
Final Steps
4. Remove door stop. Move to opposite side of freezer door as
shown. See Graphic 5.
1. Check all holes to make sure that hole plugs and screws are in
5. Position freezer handle on opposite side of freezer door. place. Reinstall top hinge cover. See Top Hinge graphic.
Assemble handle on door as shown. See Graphic 2.
6. Tighten all screws. Set aside door until hinges and refrigerator
compartment door are in place.
WARNING
Refrigerator door
1. Remove the screw cover. See Graphic 6.
2. Remove refrigerator handle assembly as shown. Keep all
parts together. See Graphic 6.
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown. See Graphic 3.
4. Remove door handle sealing screws. Move to opposite side of Electrical Shock Hazard
refrigerator door as shown. See Graphic 4.
5. Remove door handle seal screw front. Move to opposite side Plug into a grounded 3 prong outlet.
of refrigerator door as shown. See Graphic 7.
Do not remove ground prong.
6. Remove door stop. Move to opposite side of refrigerator door
as shown. See Graphic 5. Do not use an adapter.
7. Position refrigerator handle on opposite side of the refrigerator Do not use an extension cord.
door as shown. See Graphic 6. Drive top two screws in handle
first. Align lower portion of handle and drive bottom screw.Failure to follow these instructions can result in death,
8. Replace screw cover. See Graphic 6.fire, or electrical shock.
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.
2. Plug in refrigerator or reconnect power.
3. Reset the controls. See ?Using the Control.?
4. Return all removable door parts to doors and food to
refrigerator.
6 |
ACEC
