Starting Your Dryer
DRYER USE
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
Explosion Hazard
2. Turn the Cycle Control knob to the recommended cycle for
Keep flammable materials and vapors, such as
the type of load being dried. Use the Energy Preferred
gasoline, away from dryer.
Automatic Setting () to dry most heavyweight and medium
*
weight loads. See ?Drying, Cycle, and Temperature Tips.?
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
3. Select a temperature setting on models with a Temp/Fabric
selector. The cycle descriptions include temperature setting
suggestions.
NOTE: The temperature selector is part of the Cycle Contol
knob on some models.
4. Select the End of Cycle Signal, if available. The signal is
helpful when drying permanent press or synthetics. Promptly
Fire Hazardremove these items from the dryer at the end of the cycle to
prevent wrinkles.
No washer can completely remove oil.
On some models
Do not dry anything that has ever had any type of
nThe End of Cycle Signal can be adjusted. Turn the
oil on it (including cooking oils).
selector to the desired volume.
Items containing foam, rubber, or plastic must be OR
dried on a clothesline or by using an Air Cycle.nThe End of Cycle Signal is part of the START button. Turn
the START button to ON or OFF.
Failure to follow these instructions can result in
5. Select the desired option. See ?Additional Features.?
death or fire.
6. Push the START button.
Stopping and Restarting
You can stop your dryer any time during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Push START.
7 |
ACEC
