SERVICING
Before contacting your local Service Force Centre, checkTHE MACHINE LEAKS OR OVERFLOWS
your machine against the simple maintenance guidelines
* Too much washing powder.
given below.
* Unsuitable washing powder.
* Check the joints for leaks. It is rather difficult to see the
THE APPLIANCE DOES NOT START UP
water running along a hose.
* Check if the door is closed properly.
* Check if the appliance is plugged in.
THE MACHINE VIBRATES OR IS NOISY
ENGLISH
* Check the fuse.
* Check if all transport devices have been removed.
* Check if the program dial is in the correct position.
* Check if the appliance touches the walls or furniture.
* Check if the legs are adequately levelled and the nuts
THE MACHINE DOES NOT FILLtight
* Check if the water tap is on.
* Check if the tap is clogged.
* Check if the inlet hose is bent.
* Check if the water inlet filter is clogged.
THE MACHINE EMPTIES AS IT FILLS
* The end of the drain hose is too low (see page. 5)
THE MACHINE DOES NOT DRAIN OR SPIN
* Check if the drain hose is bent or squashed.
* Check if the drain filter is clogged.
* Check if the selected program includes spinning.
Rating plate
Mod. ..........Prod. No. ...........Ser. No. .........
If, after above checks, there is still a fault, call your Local
Service Centre.
Please, make sure you give the purchasing date and the
Model, Product number (Prod.No�) and Serial number (Ser.
No�) of the appliance. (These data will be found in the
Mod. ..........
adhesive card behind the door of clothes charging).
Prod. No. ...........
Ser. No. .........
P0042
11 |