SOMETHING NOT WORKING
If, having followed these instructions carefully, your cooker hood fails to work properly please carry out
the following checks.
SymptomSolution
The cooker hood will not start" Check the hood is connected to the electricity supply.
" Check that the fan speed control is set to 1, 2 or 3.
The cooker hood is not working effectively" The fan speed is set high enough for the task.
" The grease filter is clean.
" The kitchen is adequately vented to allow the entry
of fresh air.
" If set up for recirculation, check that the charcoal
filter is still effective.
" If set up for extraction, check that the ducting and
outlets are not blocked.
The cooker hood has switched off during" The safety cut-out device has been tripped.
operation" Tum off the hob and then wait for the device to reset.
If after all these checks, the problem persists,In-guarantee customers should ensure
contact your local Service Force Centre,that the above checks have been made as
quoting the model and serial number.the engineer will make a charge if the fault
is not a mechanical or electrical
Please note that it will be necessary tobreakdown.
provide proof of purchase for any
in-guarantee service calls.
SERVICE AND SPARE PARTS
If you require an engineer or wish to purchase spareFor general assistance with your appliance or for
parts contact your local Service Force Centre byinformation on Zanussi products please contact our
telephoning:Customer Care Department.
0990 929929Customer Care Department,
Zanussi
Your telephone call will be routed to your localZanussi House
Service Force Centre. For further details please see theHambridge Road
accompanying customer care book.Newbury
Berkshire
RG14 5EP
Tel: 01635 521 313*
* calls to this number may be recorded for training
purposes.
8 |