Rinse aid Filling with rinse aid
Rinse aid is automatically added during the last rinse, ensuring(Rinse aid dispenser type B)
thorough rinsing, and spot and streak free drying. The
dispenser, which is positioned inside the door, holds about 1.Open the container by turning the lid (A) anticlockwise.
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
2.Fill with rinse aid exactly up to the level indicator marked "max".
programmes, depending upon the dosage setting.
Rinse aid can be added in one of two ways:
If you are using dishwasher detergent that already contains
rinse aid, the detergent including the rinse aid is placed in
the detergent compartment.
- In this case the rinse aid compartment must be empty.
If in the rinse aid dispenser there is still rinse aid you
must wait until it has finished before using detergent that
contains rinse aid.BR01BR13
If you are using dishwasher detergent and rinse aid Ensure the lid is closed after every refill.
separately, the rinse aid is to be put into the rinse aid
dispenser.
Adjusting the dose
- In this case the rinse aid dosage must be set in position
from 1 to 6 (see "Adjusting the dose") and the rinse aid According to the finish and drying results obtained, adjust the
indicator light activated.dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
Filling with rinse aid
The dose is factory set in position 5.
(Rinse aid dispenser type A)Reduce it if there are sticky whitish streaks on the dishes.
1.Open the container by pressing the release button (A).
2.Fill with rinse aid exactly up to the level indicator marked
"max".
BR02
Top up with rinse aid when:
BR07BR14
1.The indicator (B) becomes clear,
2. Only for dishwasher models with rinse aid indicator
Ensure that the lid is closed after every refill.
light:
When the rinse aid indicator light on the control panel
illuminates (when the machine is switched on and the door
Adjusting the dose closed).
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
The dose is factory set in position 4.
Reduce it if there are sticky whitish streaks on the dishes.
BR03
BR11
Clean up any rinse aid spilt during filling with an absorbent
cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse
aid dispenser with any other substances (e.g. dishwasher
cleaning agent, liquid detergent). This would damage the
appliance.
BR09
6 |
ACEC
