Filling with saltRinse aid
Rinse aid is automatically added during the last rinse, ensuring
Only use salt specifically designed for use inthorough rinsing, and spot and streak free drying.
dishwashers.
The dispenser, which is positioned inside the door, holds about
All other types of salt not specifically designed for use in
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
a dishwasher, especially table salt, will damage the water
programmes, depending upon the dosage setting.
softener.
Only fill with salt just before starting one of the complete
washing programmes. Filling with rinse aid
This will prevent any grains of salt or salty water, which(Rinse aid dispenser type A)
may have been spilt, remaining on the bottom of the
machine for any period of time, which may cause1.Open the container by pressing the release button (A).
corrosion.
2.Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
To fill:
1.Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3.Using the funnel provided,
pour in the salt until the SALE
ZOUT
container is full.
SALT
SALZ
4.Replace the cap making SELBR07BR14
sure that there is no trace
Ensure that the lid is closed after every refill.
of salt on the screw thread
or on the gasket.
5.Screw on the cap tightly
Adjusting the dose
turning it clockwise until it
stops with a click.According to the finish and drying results obtained, adjust theSR14
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
The salt container will require topping up periodically. You are
reminded of this by the salt indicator light on the control panelIncrease the dose if there are drops of water or lime spots on
which comes on when the salt has finished.the dishes after washing.
The dose is factory set in
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has beenposition 4.
replenished, assuming the dishwasher remains switchedReduce it if there are sticky
on. If you are using salts that take longer to dissolve thenwhitish streaks on the dishes.
this can take longer. The function of the machine is not
affected.
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
BR09
6 |
ACEC
