Filling with saltRinse aid
Only use salt specifically designed for use inRinse aid is automatically added during the last rinse, ensuring
dishwashers.thorough rinsing, and spot and streak free drying.
All other types of salt not specifically designed for use inThe dispenser, which is positioned inside the door, holds about
a dishwasher, especially table salt, will damage the water110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
softener.programmes, depending upon the dosage setting.
Only fill with salt just before starting one of the complete
washing programmes.
This will prevent any grains of salt or salty water, which
Filling with rinse aid
may have been spilt, remaining on the bottom of the
machine for any period of time, which may cause1.Open the container by pressing the release button (A).
corrosion.
2.Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
To fill:
1.Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3.Using the funnel provided,
pour in the salt until the SALE
ZOUT
container is full.SALT
SALZBR07BR14
4.Replace the cap making SEL
sure that there is no trace Ensure that the lid is closed after every refill.
of salt on the screw thread
or on the gasket.
5.Screw on the cap tightly
Adjusting the dose
turning it clockwise until it
stops with a click.SR14According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
The salt container will require topping up periodically. You are
Increase the dose if there are
reminded of this by the salt indicator light on the control panel
drops of water or lime spots
which comes on when the salt has finished.
on the dishes after washing.
The salt indicator light on the control panel can remain
The dose is factory set in
illuminated for 2-6 hours after the salt has been
position 4.
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve thenReduce it if there are sticky
this can take longer. The function of the machine is notwhitish streaks on the dishes.
affected.
Do not worry if water over flows from the unit when filling with
BR09
salt, this is quite normal.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
Only use branded rinse aid for dishwashers. Never fill the
rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
Top up the rinse aid when the rinse aid indicator light on the
control panel illuminates.
6 |
ACEC
