Fitting under a counter
(kitchen worktop or sink)
By removing the machines worktop, you can install it570 - 600
under a close fitting sink unit or a pre-existing top,
providing the dimensions of the recess correspond to
those shown in the picture.820
Proceed as follows:
- Remove the machines worktop by unscrewing the 600
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
IN05
Insert the machine after adjusting height and levelling
with the adjustable feet. When inserting the machine,
ensure that the water inlet and drain hoses are not
kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will
not catch on the levelling spacers on either side of the
cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.IN06IN07
26 |
ACEC
