132993040.qxd 7/25/02 2:51 PM Pagina 10 (Nero/Process Black pellicola)
9. Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light starts
to flash. Depress the button again to restart the programme.
10. Cancelling a programme
Turn the selector dial to O to cancel a programme which
is running. Now you can select a new programme.
7. Start the programme
11. Opening the door after the
Before starting up the machine check that:
Ithe appliance is plugged inprogramme has started
Ithe water supply tap is turned onFirst set the machine to PAUSE by pressing the
Ithe drain hose is correctly and securely positionedSTART/PAUSE button.
The door can be opened when the light of the porthole
Ithe door and the detergent dispenser drawer are
has gone out.
closed.
If the door does not open, this means that the machine is
To start the selected programme, press the
already heating, that the water level is above the bottom
START/PAUSE button; the corresponding light stops
edge of the door or that the drum is turning.
flashing.
If you cannot open the door but you need to open it you
The WASHING light illuminates.have to switch the machine off by turning the selector dial
The door light comes on to indicate that the door isto ?O?. After about 3 minutes the door can be opened
(pay attention to the water level and temperature!).
locked. The machine starts operating.
12. At the end of the programme
The machine stops automatically.
The door can only be opened after the light of the
porthole has gone out.
Release of the lock is also indicated by the illumination
of the END light.
Turn the programme selector dial to ?O? to switch the
If you have chosen a delayed start, the machine willmachine off.
begin the countdown.Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
8. Altering a programme
water tap. Leave the door open to prevent the formation
You can alter the programme before it starts.of mildew and unpleasant smells.
When the programme has started, you can only reset it
by turning the programme selector dial to O and then
you can select the new programme.
The washing water remains in the tub.
Start the new programme by depressing the
START/PAUSE button.
10 |
ACEC
