Operating sequenceThe lights corresponding to the different phases
making up the selected programme light on.
The light of the START/PAUSE button starts to flash.Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
5. Select the required optionsvalve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove anyThe light corresponding to the depressed button
manufacturing residue from the drum and tub.illuminates.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
6. Start the programme2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
Depress START/PAUSE-button, the correspondingout the amount of detergent recommended by the
pilot light stops flashing. The DOOR light illuminates
and only the pilot light WASHING remains lit.manufacturer in a graduated cup and pour it into the
main wash compartment .
If you have selected the prewash, pour detergent
into the appropriate compartment marked .
3. Measure out the additive
If required, pour fabric softener into the
compartment marked , without exceeding the
?MAX? mark.
7. Altering a programme
You can alter the programme before it starts.
When the programme has started, you can only
reset it by turning the programme selector dial to O
and then you can select the new programme.
Start it by depressing the START/PAUSE button.
8. Interrupting a programme4. Select the desired programme
Depress the START/PAUSE button to interrupt aTurn the programme selector dial to the desired
programme which is running, the correspondingposition.
light starts to flash. Depress the same button again
to restart the programme.
71 |
ACEC
