Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60! C, with the machine
empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of
detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum4. Select the required programme
Open the door by pulling the handle outwards. Place
Turn the programme selector to the required
the laundry in the drum, one item at a time, shaking
programme.
them out as much as possible. Close the door.
2. Measure the detergent
5. Select the spin speed or
Pull out the dispenser drawer until it stops.
no spin / rinse hold options
Measure the required amount of detergent, pour it
Turn the spin selector to the required position.
into the main wash compartmentand into the
compartment marked(ifPRE-WASH option
has been chosen).
R0070
6. Select the required option push
button/s
3. Measure the fabric softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
R0071
40 |
ACEC
