INSTALLATION
If this model, equipped with a magnetic door lock, Electrical connection
replaces an old appliance with a catch, ensure that
Before plugging in, ensure that the voltage and
the latter cannot be used before discarding it to frequency shown on the serial number plate
prevent children being trapped inside.correspond to your domestic power supply. Voltage
can vary by ?6% of the rated voltage. For operation
Positioningwith different voltages, a suitably sized auto-
The appliance should be installed well away from transformer must be used.
sources of heat such as radiators, boilers, direct The appliance must be earthed.
sunlight etc.; best performance is obtained with The power supply cable plug is provided with a
ambient temperature between +18°C and +38°C.contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance
to a separate earth in compliance with current
regulations, consulting a specialist technician.
The Manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with EEC directive
number 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modiŢcations;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modiŢcations.
Cleaning the inside
Before using, clean all inside parts with warm water
and neutral soap to remove the typical new smell.
Dry thoroughly. Do not use abrasive detergent or
powders as these can damage the Ţnish.
4 |
ACEC
