Re Remove and clean the filters using a hard bristle brush. Turn off the water taps. Unscrew the water inlet hoses.time. It is therefore a good idea to clean them from time todeposit, the water inlet filters may become clogged. If your water is very hard or contains traces of limeThe water inlet filtersable to remove it. retightened so as to stop leaks and young children being empty. When replacing the filter, ensure it is securely wait until the appliance has finished the cycle, and is Never remove the filter during a wash cycle, always programme selected there can be hot water in the filter. When the appliance is in use and depending on theClean carefully under a fast running tap.Unscrew and remove the filter.out. bowl. Repeat the procedure until water stops flowing the bowl is full, hook the hose back up and empty the The water should drain by gravity into the bowl.When and hold the end of the hose over a bowl on the floor. this, unhook the drain hose from the standpipe or sink water manually from the machine at this stage. To do machine is unable to drain you will need to drain the catch any spillage.If the filter is blocked and the Open the filter door and place a container underneath towashing programme. the machine, and should therefore be cleaned after every A clean filter is important for the correct functioning ofThe water drain filterCleaning the filter
p
lace the f
Warning
ilters and ti
g
hten u
p
the inlet hoses.
P0133P0011
P0040P0132 |
ACEC
