132992860.qxd 5/6/03 5:33 PM Pagina 20 (Nero/Process Black pellicola)
SymptomPossible causes
The machine vibrates when spinningIThe internal packing has not been removed.
IThe machine is in contact with the wall or furniture.
IThe machine is not level and stable (check diagonally).
IThe washing load is badly distributed in the drum.
IMaybe there is very little laundry in the drum.
The door will not openIThe water level is above the bottom edge of the door.
IThe machine is heating the water.
IThe drum is turning.
The door can only be opened when the relevant light has gone out.
I
Spinning starts late or the machineThe electronic unbalance detection device has cut in because the
does not spinlaundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 15 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
The machine makes an unusualIThe machine is fitted with a type of motor which makes an unusual
noisenoise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
No water is visible in the drumIMachines based on modern technology operate very economically
using very little water without affecting performance.
Service & Spare PartsBefore calling out an engineer, please ensure you have
read the details under the heading ?Something Not
In the event of your appliance requiring service, or if
Working?.
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:When you contact the Service Force Centre you will
need to give the following details:
0870 5 9299291. Your name, address and post code
2. Your telephone number
Your telephone call will be automatically routed to the
3. Clear and concise details of fault
Service Force Centre covering your post code area.
4. The model and serial number of the appliance (found
For the address of your local Service Force Centre and
on the rating plate - see picture)
further information about Service Force, please visit the
5. The purchase date.
website at www.serviceforce.co.uk.
Please note that a valid purchase receipt or
For Customer Service in Ireland please contact us at the
guarantee documentation is required for in-
address below:
guarantee service calls.
Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
Email:
[email protected]
2020
ACEC
