132996290_FLE1016W.qxd 8/25/01 2:53 AM Pagina 7 (Nero/Process Black pellicola)
Important! If you accidentally press the SKIP/RESET7 START/PAUSE button
button more than once, the memory will be cleared.
To cause the washing machine to drain the water,This button has three functions:
select any washing programme by means of the Start: after you have selected the desired programme
FABRIC button, then press SKIP/RESET threeand options, press this button to start the washing
times in order to select the DRAIN position (only themachine. The light above the button will stop flashing
DRAIN light will remain lit).and remain lit.
Pause: when you press this button again, the
6 OPTIONS buttonprogramme in progress is interrupted. The light above
the button will start flashing. To restart the programme,
Press this button to select the following options:press the button again.
PREWASH: select this option if you wish your
When you PAUSE the cycle, the DOOR LOCKED
laundry to be prewashed before the main wash (notlight goes out, and it becomes possible to open the
available for wool).
The prewash ends with a short spin at 650 rpm indoor, provided
programmes for cotton and synthetic fabrics, whereas the washing machine is not in the heating phase
beyond 40°C;
in the programme for delicate fabrics the water is only the level of the water is not high;
drained.
SUPER RINSE: this option can be selected with all the drum is not turning.
Important! You must set the washing machine to
programmes except the wool programme.PAUSE before you make any change in the programme
The machine performs 4 rinses instead of 3. This
option is recommended for people who are allergic toin progress.
detergents, and in areas where the water is very soft. Draining of water and spinning after the execution of
programmes with the RINSE HOLD option.
QUICK WASH: for laundry that is only slightly
soiled (not for wool).
The washing time will be reduced according to the8 SKIP/RESET button
type of fabric and the selected temperature.
This button performs two functions:
The PREWASH and QUICK WASH options cannot be
selected together.- Clears the memory
- Selects special programmes
At the end of every programme the RESET button must
be pressed once or repeatedly to clear the programme
memory. All the programme phase indicator lights must
be off.
If the previous programme is not cleared, an audible
signal will sound, when you switch the machine on.
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
7 |
ACEC
