4. Select the temperature
Operating sequenceTurn the dial to the required setting.
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60!C, with
the machine empty, in order to remove any60
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drumM0027
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.5. Select the required option(s)
Close the door.
P0004
6. Select the programme and start
2. Measure out the detergent
the machine
Turn the programme selector dial clockwise to thePull out the dispenser drawer until it stops. Measure
required programme and press the On/Off buttonout the amount of detergent recommended by the
: the operating pilot light comes on and themanufacturer in a graduated cup and pour it into the
machine starts to operate.main wash compartment .
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked .
B
3. Measure out the additives
If required, pour fabric softener into the compartment
marked without exceeding the �MAXE mark.
P0215P0471
P0209P0208
34 |
ACEC
