nProblemnPossible cause
n
nThe machine vibrates or is noisy:Check that all the transit bolts and pacENGLISHking
have been removed.
nCheck that the machine is not resting against
anything.
nCheck that the support feet are resting firmly
on the ground and that the lock nuts are
securely tightened.
nCheck that the laundry is evenly distributed in
the drum.
nMaybe there is very little laundry in the drum.
n
nThe door will not open:The programme is still running.
nThe door lock has not yet been released.
nThere is water in the drum.
n
nWater is not visible in theThe machine, which is the result of modern
technology, runs in a very economical way
machine:
with low water consumption. Performance is
nevertheless excellent.
nSpinning starts late or thenThe electronic unbalance detection device
has cut in because the laundry is not evenly
machine does not spin:
distributed in the drum. The laundry is
redistributed by reverse rotation of the drum.
This may happen several times before the
unbalance disappears and normal spinning
can resume. If, after 6 minutes, the laundry is
still not evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and reselect
the spin programe.
nThe machine makes an unusualnThe machine is fitted with a commutator
motor which makes an unusual noise
noise:
compared with other traditional machines.
This motor enables a softer start to the spin
and controls the increase in spin speed
better. In this way, machine performance is
improved.
If you are unable to identify or solve the
Mod...........Ser.
problem, contact our service centre. Before
telephoning, make a note of the model, serial
number and purchase date of your machine: the
Service Centre will require this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
19 |
ACEC
