Your New Washing Machine
Your new washing machine meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption.
Even small loads are washed ?economically? because the amount of water used is regulated
automatically according to the load and type of fabric.
IAutomatic cooling of the wash water to 60°C
In the interest of the
before draining, with the 95°C programme. This
environment
reduces thermal shock to fabrics, helping to prevent
creasing.
IMaterials marked with the symbol are
IThe special wool programme with its new delicaterecyclable.
wash system treats your woollens with extreme care.ICheck with your local Council or Environmental
IThe balance control device ensures that theHealth Office to see if there are facilities in your area
washing machine remains stable when spinning.for re-cycling this appliance.
IWhen the appliance is to be scrapped, cut off the
Ecological hintspower supply cable and make the door lock device
unusable to prevent young children from being
To save water and energy and help protect the
trapped inside.
environment, we recommend that you follow these
IHelp to keep your country tidy - use authorised
hints:
disposal sites for your old appliance.
INormally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).How do we help to protect the environment?
IThe machine works more economically if it is fullyWe use recycled paper!
loaded.
IWith adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
IMeasure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed ?Something
Not Working?.
4 |
ACEC
