132990360GB.qxd 21/01/2004 10:51 Pagina 72
9. Interrupting a programme12. At the end of the programme
Depress the START/PAUSE button to interrupt aThe machine stops automatically.
programme which is running, the corresponding lightIf the anti-crease option has been selected, the
starts to flash. Depress the same button again toEND light remains lit to indicate that the water must
restart the programme.be emptied out before opening the door.
To do this turn the programme selector dial to ?O?
10. Cancelling a programmeand then to programme (drain) or (spin).
Turn the selector dial to O to cancel a programmeSelect the required spin speed by means of the
which is running.relevant dial.
Now you can select a new programme.Switch the machine off by turning the programme
selector dial to ?O?.
11. Opening the door after theRemove the laundry from the drum and carefully
programme has startedcheck that the drum is empty so as to avoid any
First set the machine to PAUSE by pressing theforgotten items being damaged in a subsequent
START/PAUSE button.wash (e.g. shrinking) or their colour running into a
If the door does not open, this means that the waterload of whites.
temperature is above 55°C, that the water level isIf you do not intend to carry out another wash, close
above the bottom edge of the door or that the drumthe water tap.
is turning.Leave the door open to prevent the formation of
mildew and unpleasant smells.
If you cannot open the door but you need to open it
you have to switch the machine off by turning the
ENGLISHprogramme selector dial to ?O?. After about 3
minutes the door can be opened (pay attention to
the water level and temperature!).
Select the programme again and depress
START/PAUSE to restart it.
72 |
ACEC
