OLED � PROGRAMMER (Fig. 21)
INSTRUCTIONS FOR USE OF CONTROL DEVICES
(ACCORDING TO THE MODELS)
Features
24 hours clock with automatic programme and minutes counter.
MINUTES COUNTERS (Fig.17)
Turn the knob clockwise to set the desired cooking time.
Functions
The minutes minder can be adjusted from 1 to 60 minutes.
Cooking time, cooking end time, manual position, clock,
A sound signal will inform you that the chosen time is up.
minutes counter, times to be set up to 23 hours 59 minutes.
Display
4-figures, 7-segments diplay for cooking times and time of day.
0
555Cooking time and manual function=saucepan symbol
5010Automatic function = AUTO
Minutes counter =bell symbol
4515The symbols light up when the corresponding functions are
selected.
4020
Fig. 17352530
Minute timer
Cooking time
A
U
PROGRAMMER WITH COOKING END TIME (Fig.18)OCooking endT
For a manual operation of the programmer, turn the knob
Manual
anticlockwise to .
Adjust the cooking time by turning the knob clockwise.Subtract time
Select the cooking time with the relevant knob (max.120 min.).
Add time
The oven will switch off automatically when the cooking is up.
Fig. 21
Setting
stop0
10To set, press and release the desired function, and within 5
120seconds set the time with + and - buttons.
20
110
30
+ and - buttons.
100
40The + and - buttons increase or decrease the time at a speed
90depending on how long the button is pressed.
50
80
60
Fig. 18Setting the time70
Press any two buttons (cooking time, end time, minutes counter)
at the same time, and + or - button to set the desired time. This
deletes any previously set programme. The contacts are switched
PCI "Campanil"TR 259 Analogic
off and the AUTO symbol flashes.
Setting the clock
Manual use
Press the control knob and turn
By pressing the manual button the relay contacts switch on, the
clockwise.XII
XIIAUTO symbol switches off and the saucepan symbol lights up.
IIManual operation can only be enabled after the automatic
Alarm programme adjustementX
IIIprogramme is over or it has been cancelled.Turn the knob clockwise without
IX
pressing it in. At the end of the
IVAutomatic use
programmed time an alarm will
VIII
VPress the cooking time or end time button to switch automatically
sound.VIIVI
from the manual to the automatic function.
To cancel it, turn the knob to the
bell.
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with + or
-. The AUTO and cooking time symbols light up continuously. The
relay switches on immediately. When the cooking end time
MECHANICAL PROGRAMMER WITH COOKING START/END TIMEcorresponds to the time of day, the relay and cooking time symbol
Setting the clock: press knob B and turn it anti-clockwise. switch off, the sound signal rings and the AUTO symbol flashes.
Adjustment of starting time: press
knob A and turn it anti-clockwise.XIISemi-automatic use with end time setting
I
Adjustment of connection time:XIPress the end time button. The time of day appears on the display.
II
turn knob B anti-clockwise withoutOSet the cooking end time with + button. The AUTO and cooking
X
pressing it in.Atime symbols light up continuously. The relay contacts switch on.
III
The end of the connection isIXWhen the cooking end time corresponds to the time of day, the
announced by an alarm bell, whichrelay and the cooking time symbol switch off. When the cooking
VIII
can be stopped by turning knob B totime is up, the AUTO symbol flashes, the sound signal rings and
VI
position 0 without pressingVboth the relay and the cooking time button switch off.
IIV
it in. Manual connection: turn knob BVI
B
to position I a without pressing it in.Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking
time with + or - button. The AUTO and cooking time symbols light
up continuously. The relay switches on. By pressing the cooking
9 |
ACEC
