Storing Custom Module Settings
The settings for the MOD module and DLY/REV module can be stored as custom settings. Stored custom settings can be called
up at any time in edit mode, for use with new patches or existing patches.
NOTE
The operation steps are different than for creating custom distortion in the DRIVE module.
When the respective module is OFF, custom module
1.Activate edit mode.
NOTE
settings cannot be stored.
2.Press the MOD key or DLY/REV key to select the
5.Press the GROUP/CUSTOM SET key and select C1
module for which you want to store custom settings.
(custom setting 1) or C2 (custom setting 2).
6.To store the custom settings you have made, press the
STORE key.
Verify that the selected module is ON.
3.Make the desired effect selection and parameter
The stored custom settings can be selected at any time, simply by
settings for the module selected in step 2.
ChangingtheSoundofaPatch(EditMode)choosing 11A (custom setting 1) or 11B (custom setting 2) for the
MOD module or DLY/REV module.
4.Press the GROUP/CUSTOM SET key.
To cancel the store process, press the CANCEL key.
The effect name flashes on the display, and the indication "C1"
flashes on the GROUP/BANK indicator.
Storing and Copying Patches (Store Mode Operation)
Unless you store edited patches in memory, the settings will revert to the original condition when the patch is switched. Do not
forget to store any edited patches that you wish to keep.
It is also possible to copy an existing patch and store it at another location. For example, copying all patches to be used in a
specific song to one user group bank will make it easy to call up the patches with foot switches 1 - 4 during a performance.
StoringandCopyingPatches(StoreModeOperation)
1.In play mode or edit mode, press the STORE key. other steps are taken. When the group/bank is changed, the
changed part of the GROUP/BANK indicator flashes.
3.To execute the patch store (copy) process, press the
STORE key once more.
The GFX-8 goes into store standby mode and the indicationThe store (copy) process is carried out, and the unit
"STORE?" and the store target patch name are shownautomatically reverts to the play mode.
alternately on the display. The GROUP/BANK indicatorTo cancel the operation, press the CANCEL key before
shows the store target group/bank number. The LED of one of thepressing the STORE key the second time.
foot switches 1 - 4 corresponding to the store target lights up.
Y The patches in the preset groups (A, b, C, d) are
If you wish to store the edited patch in another location than theread-only and cannot be used as store targets.
currently shown store target, change the patch name beforeWhen the STORE key is pressed while a patch
pressing the STORE key. from a preset group is selected, the store target is
automatically changed to "U0" and foot switch 1.
If required, change the store target with the USER
group/bank/foot switch.
"STORE?" and target patch name
are shown alternately.Y When the store (copy) process is executed, the
previous contents of the store (copy) target are
2.Use the BANK UP/DOWN foot switches and footoverwritten and cannot be restored. However, the
switches 1 - 4 to select the store (copy) target. factory default settings of any user group patch
When the edited patch was from a user group, the original(or all patches) can be restored (see page 41).
group/bank/foot switch will be selected as store target if no
18ZOOM GFX-8 |
ACEC
