HOO 504 - 505 - 545PRODUCT DESCRIPTION SHEET
CONTROL PANEL
A. Light switch.
4B. Speed selector.
1
AB
2O IO123
2
3
small amount of
1. Control panel
steam and fumes
2. Grease filter
3. Lighting unit
medium amountlarge amount
4. Telescopic flueof steam andof steam and
fumesfumes
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER:
1. Unplug the appliance or switch off the mains
power supply.
2. a- push the handles backwards
b - and then downwards.
3. After substituting or cleaning the grease filter
(depending on model) remount in reverse
order, making sure the entire extraction
surface is covered.
MOUNTING OR REPLACING THE
CARBON FILTER:
1. Unplug the appliance or switch off the mains
power supply.
2. Removing the grease filters.
3. If the carbon filters are already mounted (two
filters covering the motor-blade grille) and
need substituting, turn the central handle
anticlockwise until the filters release.
4. If the filters are not mounted, fit one on each
side covering both the motor protection grilles.
Turn the central filter handle clockwise.
5. Refit the grease filters.
REPLACING BULBS
1. Unplug the appliance or switch off the mains
power supply.
2. Remove the grease filters.
3. Remove the lighting unit from the clips that fix
it to the hood body.
4. Remove the burnt-out bulb.
Use 40W max (E14) bulbs only.
5. Remount the lighting unit
D GBFNLEPI GRS DKNFIN
5019 100 75003/ALI01SA |