GB
INSTRUCTIONS FOR USING THE ELECTRONIC PROGRAMMER
Electronic programmer Display
Set values Temperature increase indicators
Display
00:00
Using the oven with the electronic programmer
Food warmerSelecting the cooking time:
Select the cooking time (available with any function) to turn the oven on for a specified period of
Extra browningtime. At the end of the specified time the oven will switch off automatically. The maximum
programmed cooking time is 3 hours and 59 minutes.
Clock
1. Set the function and temperature or grill level (see chapter: ?Fast starting the oven? and
123
?Selecting the cooking function).
1Turn ON/OFF knob - Function selector switch
Cooking time End of cooking time
2Confirm and programme selection button2. Press button 2 until the indicator on the display blinks next to the symbol and
?- 0:00? appears.
3Pre-set values changing knob (temperature, time, levels)
Fast starting the oven
When the oven is connected to the power supply for the first time, or re-connected after a power 3. Turn knob 3 clockwise: the display will show the selected time blinking. ?-? in front of the
selected value indicates that the time will count down to ?0?.
failure, the display indicates ??.
To start the oven:
4. 20 seconds after it is set to automatic function, the oven will being cooking and the display will
1. Turn knob 1 to ?0?.
show the remaining cooking time.
2. Press button 2. The display shows ?--:--?.N.B.: to display or modify the previous temperature setting turn knob 3 one click. To return to
Selecting and changing the clock time:the display of the remaining time wait 20 seconds, or press button 2.
1. Press button 2 three times.
To use the Extra browning and Food warmer special functions, consult the chapter ?Special
2. Turn the knob 3 within 10 seconds to set the time of day. The display will show the time of
Functions?.
day blinking.
3. Press button 2 or wait 10 seconds to have the setting accepted automatically.To change the pre-set temperature or grill level:
To modify the time:Turn knob 3 and confirm by pressing button 2 or wait 10 seconds to have the setting accepted
Press button 2 twice (the indicator above the symbol will blink). Repeat the steps automatically.
described above.
Appearance of on the display:
Selecting the cooking function:
Once the set time has elapsed (end of cooking), an acoustic signal is heard and appears on
1. Turn knob 1 to the chosen function: the display will show the selected temperature or grill
the display for 15 minutes at intervals. The oven switches off automatically and the oven light stays
level blinking.
on for 25 min.
2. If the displayed value is correct, press button 2 to confirm or wait 10 seconds to have the
setting accepted automatically. 1. Press button 2 to deactivate the acoustic signal.
To change the pre-set temperature or grill level: 2. Turn knob 1 to ?0?. The oven light turns off.
1. Turn knob 3: The temperature setting (or grill level when knob 1 is set to ) The time of day appears again on the display.
will blink on the display.
2. Press button 2 to confirm or wait 10 seconds to have the setting accepted automatically.
The oven will turn on 5 seconds after confirmation: the temperature increase indicators on the
display will turn on in sequence °C----- showing the temperature increase.
N.B.:
The values set can also be changed during cooking.
At the end of cooking:
Switch the oven off by turning knob 1 to ?0?. The time of day appears again on the display.
Important notes:
To cancel any selection, turn knob 1 to ?0?.
Keeping button 2 down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons.
The audio signal is enabled again by pressing button 2 for 5 seconds. For safety reasons, the oven switches off
automatically after 4'30" of continuous operation (except for the Light and ). |