Powered SubwooferBASS2/BASSWAVE
TABLE OF CONTENTS
Specifications .................................................................1Test Procedure...............................................................4
Features..........................................................................1Wiring Diagram...............................................................5
Disassembly Procedures................................................2Parts Lists.......................................................................6
Packaging Exploded View .............................................2Integrated Circuit Diagrams ...........................................7
Bass2/Basswave Exploded View...................................3Schematic Diagrams .....................................................8
SPECIFICATIONS
Nominal Impedance: ........4ohmExternal Dimensions
Amplifier Power: ........... 100W ContinuousHeight .................. 28.17" (716mm)
Sensitivity: ...............90dB SPL*Width................... 10.25" (260mm)
Crossover Frequency: .......120 Hz (Nominal)Depth................... 12.05" (306mm)
Frequency Response: .......40Hzto120 Hz (+/-3 dB)Shipping Weight ...........32lbs (14.5 kg)
Amplifier Input Impedance: ....48k ohm(Line)/1k ohm (Speaker)
Aural Sweep Test Specifications:
A. System Aural Sweep Test: . . 5.0V Input, 10 Hz to 1 kHz*1 Watt @ 1 Meter
B. L.F. Aural Sweep Test: .... 5.0V Input, 10 Hz to 1 kHz
FEATURES
TheBass2/BasswavepoweredsubwooferispartoftheUserfriendlyautooncircuit.Signalsensing
MUSIC 2 System.automatically turns the subwoofer on so you don't have
to; the subwoofer is meant to be left on without use of
100wattoutput.a power switch*
Variablelevelcontrol.Speakerismagneticallyshieldedforuseneartelevisions
or computer monitors.
Linelevelandspeakerlevelinputs.
* Early versions of the Bass2/Basswave will cycle into a standby mode when the signal source is absent after a
predetermined time; the green LED turns OFF when this happens on the 120 volt version, the LED cycles to RED on
the 230 volt version. The subwoofer's sensitivity to input signals was increased in later versions and these units stay
ON, even when the input signal is absent. This is a normal condition, and does not compromise the safety, integrity, or
dependability of the product in any way.
1 |