B3300 SeriesB3300 Series
MAINTENANCE
REPLACING THE DUSTBAG
O Always operate the cleaner with the dustbag installed.
O If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not
close completely.
O After removing the flexible hose, open the front cover using the compartment open button.
fig. 18
O Rotate the support of the bag to the vertical position.
O Remove the dustbag and insert a new one. fig. 19
O Close the cover by pressing down until it clicks. fig. 18
O The dustbag reference number is U59
BLOCKED AIRFLOW AND DIRTY FILTERS
O The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters
are blocked with dirt.
O Disconnect from mains and allow the cleaner to cool for 45-60 minutes. Remove blockage
and/or replace filters.
O Restart the cleaner.
CLEANING/REPLACING THE FILTERS
O The dustbag must be replaced if the window of the dustbag full indicator is illuminated.
O Filters should be replaced at least twice a year or when they become visibly soiled.
O Always operate the cleaners with filters installed to avoid reduced suction.
O Disconnect from electrical outlet before cleaning filters.
Cleaning the motor filter
O Pull dustbag upward and remove the motor protection filter. fig. 20
O Rinse the filter under tap water and dry it completely. fig.23
O Put the filter back into the cleaner and close the cover. fig.20
Cleaning the exhaust filter
O Open the filter grill and remove the exhaust filter. fig.21, fig.22
O Rinse the filter under tap water and dry it completely. fig.23
O Put the filter back into the cleaner and close the filter grill. fig.22, fig.21 |