Using the appliance
Starting the programmePause function
1. Scrape or rinse off solid food remnants.With the paus function the programme can be temporarily
disrupted for a short period of time.
2. Load the dishwasher.
(See the basket and loading).1. Open the door and press the On/Off button. The
3. Put the correct amount of detergent into the programme stops.
detergent dispenser and close the dispenser lid.2. All lamps goes out.
4. Press in the On/Off button. All programme 3. When you want the programme to continue again,
indicator lamps are lit.press the On/Off button once more and close
5. Press in the required programme button (see pro-the door. The programme continues.
gramme chart). All other programme indicator The programme should not be paused for any
lamps goes out. longer than necessary, because the water inside
the dishwasher has cooled down and must be
6. Close the door.
heated again which increases the power
7. Check the strainers/Å¢lters to see if they need to consumption.
be cleaned when the dishwasher has Ţnished
the programme.Cancelling the drying phase
Stopping the programme temporarilyIn case you do not want to wait until the drying phase is
completed, you can cancel it by open the door. The
1. Open the door. The programme stops.drying phase is now cancelled.
2. The programme indicator lamp is lit.Switching the dishwasher off
3. Close the door and the programme continues
after about 6 seconds. Switch the dishwasher off when the buzzer for ended
programme sounds (approx. 15 seconds) or the lamp for
Open the door carefully when the dishwasher isthe ended programme cycle is lit.
running, since hot steam may escape. 1. Open the door and press the On/Off button.
Be careful if you open the door immediately
Cancelling the programmeafter the programme is Ţnished, since hot steam
1. Open the door.may escape.
2. Press and hold in the combination buttons, This dishwasher has a new feature called
the machine goes to starting position and all �IMPULSE WASHING�. This washing system
programme indicator lamps are lit.varies both the revolutions of the pump and the
3. Release the buttons. The programme is now water pressure for more intensive cleaning of the
cancelled and a new programme can be dishes during the programme. That is why different
selected. sections of the programme cycle do not sounds
If you switch the dishwasher off, the selected the same.
programme is not Ţnished, it is only disrupted.
When you start the dishwasher again, the pro-
gramme will continue.
- 9 - |