SAFETY INSTRUCTIONS
General safety instructionsFuel safety
IMPORTANT INFORMATIONY Never fill the machine while the engine is running. Always
stop the engine and let it cool for a few minutes before
Y The machine is solely designed for drilling inrefuelling.
ice.
Y Never use the machine if you are tired, if youY Provide good ventilation when filling or mixing fuel (petrol
and 2-stroke oil).
have consumed alcohol, or if you are taking
medicines that can affect your sight, your
judgement or the control of your body.Y Move the machine at least 3 m from the filling position
before starting.
Y Use personal protective equipment. See the
section �Personal protective equipment�.Y Never start the machine:
Y Never use a machine that has been modified soa) If you have spilt fuel on it. Wipe up all spillage.
that it no longer corresponds with the original
design.b) If you have spilt fuel on yourself or your clothes. Change
Y Never use a machine that is faulty. Follow theyour clothes.
maintenance, control and service instructions in
this OperatorOs Manual.c) If there is a fuel leak. Make regular checks for leakage from
Some maintenance and service actions shouldthe fuel cap and the fuel supply pipes.
be carried out by trained and qualified
specialists. See the chapter �Maintenance�.
StartTransport and storage
Y The gearbox and clutch drum must be fitted before the
Y Store and transport the machine and fuel so that any
machine is started, otherwise the clutch can become looseleakage or fumes do not risk coming into contact with
and cause personal injury.
sparks or naked flames. For example, electric machines,
electric motors, electrical switches/power switches, heaters
Y Never start the machine indoors. Bear in mind the dangersor the like.
of inhaling the engineOs exhaust fumes.
Y When storing and transporting fuel, approved containers
Y Check your surroundings and make sure that there is nointended for this purpose must be used.
risk of people or animals coming into contact with the
cutting attachment.Y When storing the machine for long periods the fuel tank
must be emptied. Contact your local petrol station to find
Y Place the machine on theout how to dispose of excess fuel.
ice. Press the body of the
machine against the ice
Y The transport guard for the cutting attachment must always
using your left handbe fitted when the machine is transported or stored.
(NOTE! Do not use your
foot). Grip the starter
handle with your rightWARNING!
hand and pull the starterExercise great care when handling fuel.
!Bear in mind the risk of fire, explosions
cord.and inhaling fumes.
English � 7 |