ASSEMBLY
133R: Hook the blade guard/combination guard (A) onto
Fitting the guard extension
the Ţtting on the shaft and secure with the bolt (L).
143R
CAUTION! The guard extension shall always be Ţtted when
using the trimmer head/plastic blades and combination
guard. The guard extension shall always be removed when
using the grass blade and combination guard.
Enter the guard extension guide in the slot of the combination
guard. Then click the guard extension into position on the
guard with the four quick-fasteners.
142R: Fit the guard (A) to the gear housing using the
support plate (M) and two screws (L).
CAUTION! Ensure that the guard extension is removed.
Use the recommended blade guard. See the Technical
data section.
The guard extension is removed easily using the spark plug L
spanner, see illustration.M
A
143R: Hook the blade guard/combination guard (A) onto
Fitting the transport guardthe Ţtting on the shaft and secure with the bolt. CAUTION!
Ensure that the guard extension is removed. Use the
1 Insert the tips of the blade into the grooves in the transport recommended blade guard. See the Technical data
guard (A).section.
2 Wind the transport guard around the teeth of the blade,
then clip the ends together (B).
AB
A
? Fit the drive disc (B) on the output shaft.
Fitting a blade guard, grass blade ? Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
and grass cutter
? Insert the locking pin (C) in the hole to lock the shaft.
? Place the blade (D), support cup (E) and support �ange
(F) on the output shaft.
? 132R: The blade guard (A) is Ţtted using 4 screws (L) as
shown. CAUTION! Use the recommended blade guard.
See the Technical data section.
L
A
English - 13 |