180P LCD13
Trouble Shooting
Go to cover page
TROUBLESHOOTINGHorizontal flickerPush the Auto button.
appearsEliminate the horizontal bars using the Phase
This page presents problems that can be corrected by the user. If theAdjustment in the First Window.
problem still exists after these possible solutions, a further action has
to be take by authorized technicians.
No PictureMake sure the Power cable is plugged to the
(Power LED not lit) wall and back of the monitor.
Make sure the DC power cord has been
attached to the DC jack.The screen is tooAdjust the contrast and brightness using the
First, power button in front of the monitorbright or too dark First Window.
should be in the OFF position, then press it to(The backlight of the LCD monitor has a fixed
ON position again.life span. When the screen becomes dark or
begins to flicker,please contact your dealer.)
No PictureMake sure the computer is turned on.
(Power LED isMake sure the signal cable is properlyAn after-imageIf an image remains in the screen for an
Amber or Yellow in connected to your computer.appearsextended period of time,it may be imprinted in
color)Check to see if the monitor cable has bent pins.the screen and leave an after-image. This
The Energy Saving Feature may be activated.usually disappears after a few hours.
An after-imageThis is characteristic of liquid crystal and is
Screen saysMake sure the monitor cable is properlyremains after thenot caused by a malfunction or deterioration
connected to your computer.power has beenof the liquid crystal. The after-image will
Check to see if the monitor cable has bent pins.turned offdisappear after a set amount of time.
Make sure the computer is turned on.
Green, red,The remaining dots are normal
blue, dark andcharactericstic of the liquid crystal used in
white dotstoday's technology.
remain on the
screen
AUTO button notThe Auto Function is designed for
workinguse on standard Macintosh or
properlyIBM-compatible PC running Microsoft
Windows.
It may not work properly if using
non-standard PCs or video card.
Imaging
Problems
Display positionPush the AUTO button.
Adjust the image position using the Horizontal
is incorrect
Position&/orVertical Position in the Second
Window.
Check that the signal cable is properlyImage vibrates
connected to the graphics board or PC.
on the screen
Vertical flickerPush the AUTO button.
appearsEliminate the vertical bars using the Clock
Adjustment in the FIRST Window.
BackForward |
ACEC
PHILIPS
