TROUBLESHOOTING TIPS
No PowerS-VHS Color Becomes Faint
? Check the TV power cord. Unplug the TV, wait 10 seconds,? Unplug socket for S-Video connection. Reconnect the S-Video
then reinsert the plug into the outlet and push the POWER socket of the TV slowly to the VCR socket.
button again.
? Check that the outlet is not on a wall switch. TV Only Produces MONO Sound
? Be sure the fuse is not blown on the AC power strip, if one is?If using a cable box with RF only type connections, the signal
being used.coming from the cable box will be produced in MONO only.
? Check Sound control setting. Change setting to Stereo.
No Picture
? Check antenna/cable connections. Are they properly securedRemote Does Not Work
to the TV's ANT 75P plug?? Check the batteries. If necessary, replace them with AA
? Check the TUNER MODE control for the correct tuner set-Heavy Duty (Zinc Chloride) or Alkaline batteries.
ting.?Clean the remote control and the remote control sensor win-
? Try running the Auto Program feature to find all availabledow on the TV.
channels.? Check the TV power cord. Unplug the TV, wait 10 seconds,
? Press the SOURCE button on the remote to make sure thethen reinsert the plug into the outlet and push the POWER
correct signal source is selected.button again.
? If using an accessory device, be sure that it is functioning?Be sure the fuse is not blown on the AC power strip, if one is
properly.being used.
? If in PC Mode, a video signal MUST BE present or the TV? Check to be sure the TV outlet is not on a wall switch.
will turn off.? Be sure that the remote is in the correct operating mode.
? Be sure the remote is pointed at the Remote Sensor Window
No Soundon the TV. See page 1 of the Quick Use Guide for details.
? Check the VOLUME buttons.
? Check the MUTE button on the remote control.TV Displays Wrong Channel or No Channels Above 13
? If you?re attempting to hook up auxiliary equipment, check?Repeat channel selection.
the audio jack connections.?Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV?s memory.
No AV Signal? Check to be sure the TUNER MODES are set to the CABLE
? Check whether AV and S-Video sockets connected option and run the Auto Program feature to find all available
simultaneously. If they are, disconnect the S-Video socket.channels.
AV signal automatically overrides the S-Video signal if
both sockets are connected simultaneously.
35 |
ACEC
PHILIPS
