BM 1609929H54 08-06 8/3/06 11:44 AM Page 7
Grinder Assembly
WHEEL GUARD INSTALLATIONWhen using spin-on grinding wheels, thread
Use wheel guard with discdirectly onto the spindle.
!WARNING
grinding wheels. AlwaysWhen using mounting wheels, thread
close the latch to secure the guard. Keep theBACKING FLANGE onto spindle, then place
guard between you and the wheel. Do notGRINDING WHEEL on the spindle. Thread
direct guard opening toward your body.on the lock nut and tighten nut using a lock
The position of the guard can be adjusted tonut wrench provided with adapter kit, while
accommodate the operation being performed.holding the spindle lock in.
TO REMOVE: Reverse procedure.
To attach wheel guard DISCONNECT tool
from power source. CUP GRINDING WHEELS
Open guard release/lock latch and positionUse cup grinding wheels for heavy-duty stock
guard on spindle neck so that the two bumpsremoval of metals, concrete and stone.
on guard, line up with the two notches on the
spindle neck.ADJUSTABLE CUP
WHEEL GUARD INSTALLATION
Rotate guard either direction to desiredOpen the guard clamp and fit it on the
position, and close latch to secure guard inmounting flange then secure by tightening
place.the clamp screw. ALWAYS HAVE THIS
TO REMOVE GUARD: Open guardGUARD ATTACHED WHEN USING CUP
release/lock latch, rotate guard until the twoGRINDING WHEELS
bumps on guard line up with the two notches
The adjustable guard allows you to lower or
on the spindle neck, and lift guard off theraise the guardOs shell. TO ADJUST: Loosen
spindle neck.the four bolts on the shell, and secure the
LOCK NUT AND BACKING FLANGEshell for 1/4� wheel exposure for maximum
Your tool is equipped with a threaded spindlesafety.
for mounting accessories. Always use the
lock nut and backing flange that has sameATTACHING CUP GRINDING WHEEL
thread size as spindle.Thread the cup grinding wheel on the spindle
shaft CLOCKWISE. Press in the spindle lock
DISC GRINDING WHEEL ASSEMBLYbutton and turn the cup grinding wheel until
Disconnect tool from power source. Be surethe lock button engages, then tighten the
that wheel guard is in place for grinding.wheel securely by hand.
TO REMOVE: Reverse procedure.
MOUNTING
FLANGE
SPINDLE
GUARD
RELEASE / LOCK
LATCHSPINDLE
WHEELBUMPSMOUNTING
FLANGE
GUARD
ADJUSTABLE
GUARD
BACKINGSPIN-ON
FLANGEGRINDINGSHELL
WHEELBOLT
DISC
GRINDING
WHEELCUP
GRINDING
LOCK NUTWHEEL
-7- |
ACEC
BOSCH
