19L-M100, CL19M10
19L-M100S, 20ML10
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter
circuit.
Note: There are still a few analog adjustments in this series such as focus and master screen voltage.
Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if serv-
ice adjustments are required.
1. Service modeTo enter the service mode and exit service
Before putting unit into the service mode, check thatmode.
customer adjustments are in the normal mode. Use
the reset function in the video adjustment menu toWhile pressing the Vol-up and Ch-up buttons at the
sametime, plug the AC cord into a wall socket.
ensure customer controls are in their proper (reset)
Now the TV set is switched on and enters the service
position.
mode.
To exit the service mode, turn the television off by
2. Service number selection
pressing the power button.
Once in the service mode, press the Ch-up or Ch-
down button on the remote controller or at the set.
The service adjustment number will vary in
increments of one, from "S01" to "OP". Select the
item you wish to adjust.
3. Data number selection
Press the Vol-up or down button to adjust the data
number.
DATA NUMBER
CHANNEL
SERVICE ADJUSTMENT NUMBER
S0155(085)02
S01 D:00
Figure A.
8 |