and stored the TV signals. See Tuning, SearchConnecting Headphones
and Store TV channels. Store the test signal
under programme number 0.Use the stereo headphone socket (HP) on the
lower right side of your TV, to connect head-
? Replace the aerial cable in the aerial socket
?ANT.? of your video recorder once you havephones.
stored the test signal.Tips
Camera and CamcorderCare of the Screen
To connect to Front-AV input (F-AV):Clean the screen with a slightly damp, soft
Connect your camera or camcorder at the frontcloth. Do not use abrasive solvents as they
may damage the TV screen coating layer
side of your TV.
Poor Picture
? Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)Have you selected the correct TV system? Is
inputs. You should connect the jacks to the in-
your TV set or house aerial located too close
put in the same colour.to the loudspeakers, non-earthed audio
equipment or neon lights, etc. ?
Back-AV output:
Mountains or high buildings can cause double
Connect your camera or camcorder at the back
side of your TV.pictures or ghost images. Sometimes you can
improve the picture quality by changing the
? Connect your equipment to the TV via VIDEO,direction of the aerial.
AUDIO R and AUDIO L inputs. You should
Is the picture or Teletext unrecognisable?
connect the jacks to the input in the sameCheck if you have entered the correct fre-
colour. Back AV output outputs only the
quency.
information coming from the ANT. (aerial)
socket, so you can not output external sourcesThe picture quality may degrade when two
from Back AV output.peripherals are connected to the TV at the
same time. In such a case, disconnect one of
SVHS (via EXT.2)
the peripherals.
If the equipment connected to your TV set sup-
No Picture
ports S-Video (Y/C) output from Euroconnec-
tor, you can have a better picture quality byIs the aerial connected properly? Are the plugs
selecting SVHS mode and connecting yourconnected tightly to the aerial socket? Is the
equipment to the EXT.2 terminal of TV. Seeaerial cable damaged? Are suitable plugs
your equipment's booklet to check if yourused to connect the aerial? If you are in doubt,
consult your dealer.
equipment has such feature.
No Picture means that your TV is not receiving
Connect the decoder to the video
any transmission. Have you pressed the cor-
recorderrect keys on the remote control? Try once
Some video recorders have a specialmore.
euroconnector for decoder.Sound
? Connect a eurocable to the euroconnector ofYou can not hear any sound. Did you perhaps
your decoder and to the special eurocon-
nector of your video recorder. See also theinterrupt the sound, pressing ? ? key? Are
external speakers connected to the TV?
handbook of your video recorder.
Sound is coming from only one of the speak-
? To connect your video recorder to the TV, seeers. Is the balance set to one direction ex-
TV and Video Recorder section.
treme? See SOUND menu.
If you want to connect more equipment to your
TV, consult your dealer.
ENGLISH - 20 - |
ACEC
TOSHIBA
