ITEMADJUSTMENT PROCEDURE
WHITE BALANCE1. Set Contrast to 40, and brightness to +20 by picture control.
ADJUSTMENT2. Receive the Black and White pattern.
3. Select RCUT, GCUT and BCUT with CHANNEL s, t buttons, to set individual
YCUTOFF ADJUSTMENTvalues to Initial reference data, and to set GDRV and BDRV to Initial reference
(RCUT)data with VOLUME ; � /+ buttons (See page 18).
(GCUT)4. Press -/- - button on the remote control and rotate Screen VR to get one slight
(BCUT)horizontal line on screen.
Note: Every pressing of -/- - button provides Horizontal line picture and Normal
YDRIVE ADJUSTMENTpicture alternately.
(GDRV)5. Press -/- - button to release horizontal line picture, and select the two other colors
(BDRV)which did not light in the above step with CHANNEL s, t buttons. Then tap VOL-
UME ; � /+ buttons so that three colors slightly light in the same level.
GENERAL ADJUSTMENTS
X To correct white balance in light area,
Light area check
select GDRV and BDRV with CHANNEL
(to show white)
s, t buttons to adjust.
X To correct white balance in dark area,
perform fine adjustment of RCUT, GCUT
and BCUT.
Dark area check
(to show black)
SPECIFIC INFORMATIONS
� 11 � |
ACEC
TOSHIBA
