SPECIAL SOUND FEATURES
Dolby Digital
Dolby Digital is available from DVD players, some games console players, etc. These must be connected
using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 37.
Dolby Digital
Arrange the speakers around your normal viewingDELAY TIME�
positions (as shown on page 6) and then make sure thatIf you sit a long way from the TV and close to the rear
the TV is set up as follows:speakers the sound from the rear will reach you before
the sound from the front. You can use a higher setting
The DVD/Games console is connected to the TV using
1in theDelay timeoption to restore the correct balance.
phono leads to the COMPONENT VIDEO INPUT or a
Scart lead to Scart 3, andan optical or coaxial cable to
the optical/coaxial sockets, DA-1 or DA-2.Press the TV MENU button and from the Feature
1
menu select Surround set up.
The Digital input-1(optical)/ Digital input-2(coaxial)
2
in the AV connection menu (see page 25) is set to With Delay time highlighted, use the S or R button
2
EXT 3 if Scart 3 is used or EXT 4 if the equipment isto change the setting to a value that suits you.
connected to COMPONENT VIDEO INPUT.
Press EXIT when you have finished.
3
If external front speakers are connected
3
the external switch (found on the back
of the TV) is set to EXT. You will not hear the centre
!
channel without external front speakers connected.If rear speakers are NOT
selected in the
Surround set up
menu, you will not hear any sound
Rear speakers are connected and the Rear speaker
4from your rear speakers.
option in the Surround set upmenu is set to YES.
(See next page.)
Adjustments
Set the volumeand balanceof the front speakers to your preference. Play a Dolby
1
Digital source and press the TV MENU button on the TVOs remote control. Select the
Sound menu.
Press the Q button to highlight Surround and press R. Highlight the title, e.g. Dolby
2
Digital 3/2, which is an indication of the channels available from your current sound
source, see the table below.
Then press the R button and adjust the levels using the P or Q button to select the
3
centre and two rear speakers in turn. Press either the Sor R button to adjust. The
number of adjustable speakers will depend upon the signal received from the DVD
player. To cancel the test press the EXIT button.
Dolby Digital
!
Alternatively, use the Test mode in the
1/0=Centre speaker only.
Surround set up menu, see page 29.
2/0=Front Left and Front Right only.
2/1=Front Left and Front Right +
If the DVD playing is recorded in Dolby Pro Logic,
Rear Left and Rear Right combined.
i.e. 4 channel stereo (front left, front right, centre
2/2=Front Left and Front Right +
and rear) the TV will detect the 4 channels.
Independent Rear Left and Independent Rear Right.
Surround test is run
In this instance, when the 3/0=Front Left and Front Right and Centre.
the TV will cycle through the four channels No Rear Speakers.
in use.3/1=Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
In order to get full Dolby Digital, the DVD
3/2=Front Left and Front Right and Centre +
player must be connected using the
Independent Rear Left and Independent Rear Right.
coaxial or optical links.
28 |
ACEC
TOSHIBA
