2354.1 en 14-10-2004 09:55 Pagina 8
Recorder (VCR-DVD+RW)
Note:Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display.Keep a minimum distance of 50 cm from the screen.
&Connect the RF Antenna or Cable TV cable 1
AV2MON.OUT
(eventually via an optional two-way signal splitter and/or
VIDEO/AUDIO S-VIDEO VIDEO/AUDIOx ANTENNA
Cable TV convertor box) to the RF IN socket of your
R
recorder.
éConnect another RF cable 2from the output OUTof
CABLEyour recorder to the TVOs input xANTENNA jack.
4
ŤConnect the supplied adapter cable mini-jack to cinch
3
3 to the VIDEO/AUDIO input jack of AV2.
If your recorder has an S-VHS video jack:
INOUTFor improved picture quality, connect an S-video cable
4 with the S-VIDEO input.
S-VHS does not provide audio, so the mini-jack to cinch
cable must still be connected to provide sound.
RECORDER
Recorder and other A/V devices
&Connect the RF Antenna or Cable TV cable 1to the
RF INsocket of your other A/V device.
AV2 MON.OUTéConnect the supplied adapter cable mini-jack to cinch
VIDEO/AUDIO S-VIDEOVIDEO/AUDIOx ANTENNA2 to the VIDEO/AUDIO input jack of AV2.
RŤConnect the RF output of the A/V device to the RF
input on the recorder 3.
CABLEŹConnect another RF cable 4from the output OUTof
your recorder to the TVOs input xANTENNA jack.
4
If your recorder has an S-VHS video jack: see above.
OUTINThe MON.OUT connector can be used for a daisy
xTV
chaining or to record programs from your TV. Only when
3
a recorder is connected to MON.OUT it is possible to
RECORDERrecord a program from other devices connected to the
TV.
See Record with your recorder, p. 14.
Devices with Component Video Output Connectors (YPbPr)
AV1 (1Fh)
PrPbY&Connect the three separate component video cables 1to the
device having component video outputs (YPbPr), such as DVD-
RLCVBS
players, laser-disc players, videogame players, satellite receivers, or
AUDIO
other equipment and to the Y,Pb and Pr jacks of AV1 on the TV.
VIDEOVIDEO
L/MonoMonoL/éConnect the audio cable 2 to the deviceOs AUDIO Land Rjacks
AUDIOAUDIO
and to the L and R audio YPbPr jacks of AV1.
ŤFor reproduction of CVI (Component Video Input) also connect to
12
the CVBS jack of AV1. See the handbook of your DVD player.
Note:the labels for the component video sockets may differ depending on
the DVD player or the device connected.Although the abbreviations may
vary the letters B and R stand for blue and red component signals,
respectively,and Y indicates the luminance signal.Refer to the DVD
playerOs or deviceOs instructions for use for definitions and connection
details.
DVD
8 |
ACEC
PHILIPS
