Starting Your Washer
Load evenly to maintain washer balance. Mix large and
small items.
WARNING
Items should move easily through the wash water.
Overloading can cause poor cleaning.
To reduce wrinkling of permanent press clothes and some
synthetic knits, use a large load size to provide more
space (see Step 5).
2. (OPTIONAL) Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser. Bleach will be diluted
Fire Hazard
automatically during the wash part of the cycle.
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not use more than 1 cup (250 mL) for a full load. Use
less with a smaller load size.
Follow the manufacturer?s directions for proper use.
To avoid spilling, use a cup with a pouring spout. Do not WARNING
let bleach splash, drip, or run down into the washer
basket.
Use only liquid chlorine bleach in this dispenser.
3. (OPTIONAL) Pour measured liquid fabric softener into the
liquid fabric softener dispenser. Softener is added
automatically during the rinse portion of the cycle.
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the crossbar in the opening.
Do not spill or drip any fabric softener on the clothes.
1. Measure detergent and pour it into the washer. If desired, add Use only liquid fabric softener in this dispenser.
powder or liquid color safe bleach. Add extra detergent for
the Super Wash/Heavy cycle. 4. Close the washer lid.
5. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
Choose a load size that allows the load to move freely for
best fabric care. See ?Loading.?
You may change the load size selection after the washer
has started filling by turning the selector to a different
setting.
Drop a sorted load of clothes loosely into your washer.
6 |