Information for Users in the UK
This information is specific to the UK. If must be replaced with a fuse of the same
you are using your TV in the UK, use this value as indicated on the plug.
information in conjunction with the rest of
1. Remove fuse cover and fuse.
this manual.
2. Replace the fuse.
Positioning the TVThe replacement fuse must comply with
BS 1362 and have the ASTA approval
For the best results, choose a position mark. If the fuse is lost, contact your re-
where light does not fall directly on the tailer in order to verify the correct type.
screen, and at some distance away from
radiators or other sources of heat. Leave 3. Refit the fuse cover.
a space of at least 5cm around the TV for If for any reason the fitted plug is not
ventilation. Ensure that curtains, cupboards suitable for your socket outlet, consult
and other items cannot obstruct the air flow your retailer or a qualified electrician
through the ventilation apertures. The TV is before proceeding with the installation.
intended for use in a domestic environment
only and should never be operated or stored
in excessively hot or humid atmospheres.Connecting the Aerial
The aerial should be connected to the
Interferencesocket marked : at the back of the set. An
inferior aerial is likely to result in a poor,
The Department of Trade and Industry perhaps unstable picture with ghost images
operates a Radio Interference Investigation and lack of contrast. Make-shift loft or set-
Service to help TV licence holders improve top aerials are often inadequate. Your dealer
reception of BBC and IBA programmes will know from experience the most suitable
where they are being spoilt by interference. type for your locality. Should you wish to
If your dealer cannot help, ask at a main Post use the set in conjunction with other equip-
Office for the booklet OHow to Improve Televi-ment, which connects to the aerial socket
sion and Radio Reception�.such as TV games, or a video camera it is
recommended that these be connected via a
combiner unit to avoid repeated connection
Mains Connectionand disconnection of the aerial plug.
Before connecting the TV to the mains,
check that the mains supply voltage cor-Fitting the Stand (If Provided)
responds to the voltage printed on the
type plate on the rear panel of the TV. If Use only the stand provided with the set.
the mains voltage is different, consult your Ensure that the fixings are properly tight-
dealer.ened. A diagram showing how to assemble
the stand is packed with the stand. Never
Importantuse a make-shift stand, or legs fixed with
screws.
This apparatus is fitted with an approved
moulded 13 AMP plug. Should it become
necessary to replace the mains fuse, this |
ACEC
PHILIPS
