Selecting Patches for PlaySelecting Patches for Play
To try out the 505 II, we recommend that you simply play your
instrument while switching patches. This will let you quickly see what
the 505 II can do.
Power-on
When using the 505 II on batteries,
SelectingPatchesforPlaySelectingPatchesforPlay
plug a shielded cable with mono phone To directly switch
plug into the INPUT jack of the 505 II.
the bank
When using the 505 II with the AC You can use the [+]/[-] keys to directly
adapter, plug the adapter into the outlet switch among the banks A - F.
and plug the cable from the adapter
into the DC 9V jack on the 505 II.
Turn on the guitar amplifier and adjust
To adjust the master
the volume to a suitable position.
volume
Keep both [+]/[-] keys depressed
Set 505 II to play mode for more than 1 second.
When the [PLAY/EDIT] selector is set to
a different position, set it to "PLAY". 40
While the master volume setting is
The currently selected bank and
shown, pressing the [+] or [-] key
A1patch number are shown on the
changes the setting.
display.
The setting range is 0 - 50. When the unit
Bank Patch
Immediately after turning on power is turned off and on again, the setting will
number
to the 505 II, the unit will be in play
be reset to 40.
mode also if the [PLAY/EDIT]
selector is set to a different When using headphones, the
position.master volume setting can be used
to adjust the listening volume.
Switch patches
To switch patches in play mode, use the [ ]/[ ]
foot switches.
8ZOOM 505 II GUITARZOOM 505 II GUITAR9 |