PnP/PCI Configuration 5DHX
PCI IRQ Actived By
This option is hardware related setting and it tell the system the IRQ signals level
or edge trigger. You can select either level or edge in this option. Most PCI IRQ
function actived by level. If your PCI card is not function on your board, you can
try to select edge option. Please consult your hardware supplier for information.
PCI IDE IRQ Map To
Primary IDE INT:
Secondary IDE INT:
This option indicates the presence and the information of an offboard PCI IDE
device. The first option indicates the slot number of PCI IDE and the other options
indicate how IRQ14 and IRQ15 are routed to the device. If an IDE IRQ MAP To
is set to PCI-AUTO, this means that the system will scan for PCI IDE devices &
determine the location of the PCI IDE device. If this option is set to PCI-SLOT,
this indicates that the offboard PCI IDE device is present and the system will route
the IRQ to that SLOT. If an IDE IRQ MAP is set to ISA, the system does not
need to route the IRQ because a paddle card is installed and the IRQ is received
from an ISA slot. Otherwise, the IRQ can be routed correctly according to the
specification of the INT# value.
Page 22 |
ACEC
OTHERS
