To reduce wrinkling of permanent press clothes and some
synthetic knits, use a large load size to provide more space
Starting Your Washer
(see step 5).
2. (OPTIONAL STEP) Pour measured liquid bleach into the liquid
bleach dispenser (on some models). Bleach will be dispensed
automatically during the wash part of the cycle.
Fire Hazard
Never use more than 250 mL (1 cup) for a full load. Use
less with a smaller load size.
Never place items in the washer that are
Follow the manufacturer?s directions for safe use.
dampened with petrol or other flammable fluids.
To avoid spilling, use a cup with a pouring spout. Do not
No washer can completely remove oil.
let bleach splash, drip, or run down into the washer
basket.
Do not dry anything that has ever had any type of
Use only liquid bleach in this dispenser.
oil on it (including cooking oils).
NOTE: On models without a liquid bleach dispenser, see
Doing so can result in death, explosion, or fire.
?Adding Liquid Bleach.?
3. (OPTIONAL STEP) Pour measured liquid fabric softener into
the liquid fabric softener dispenser (on some models).
Softener is added automatically during the rinse portion of
the cycle.
WARNING
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the crossbar in the opening.
Electrical Shock Hazard
Plug into an earthed plug socket outlet.Do not spill or drip any fabric softener on the clothes.
Do not remove earth pin.Use only liquid fabric softener in this dispenser.
NOTE: On models without a fabric softener dispenser, see
Do not use an adaptor.
?Adding Liquid Fabric Softener.?
Do not use an extension cord.
4. Close the washer lid.
Failure to follow these instructions can result in5. Turn the LOAD SIZE selector to the correct setting for your
death, fire, or electrical shock.wash load and the type of fabric being washed.
Choose a load size that allows the load to move freely for
1. Measure detergent and pour it into the washer. If desired, add best fabric care. See "Loading."
powdered or liquid colour safe bleach. If the water
You may change the load size selection after the washer
temperature is too low, dilute the detergent in warm water. has started filling by turning the selector to a different
Add extra detergent for the Super Wash cycle. Follow setting. If your washer has a RESET option, first move the
detergent manufacturer?s directions. selector to RESET, then to the new water level.
Drop a sorted load of clothes loosely into your washer.
Load evenly to maintain washer balance. Mix large and small
items. Larger items such as sheets should be added last.
Items should move easily through the wash water.
Overloading can cause poor cleaning.
6 |
ACEC
WHIRLPOOL
