ýTest Meter
ITEM
Adjusting
yTest Point Operation
Program Menu. > Value
Pattern
Preset Four key model : Other adj. :
Adjust Step 1 : Press and relese the OSD control knob to Best Point
activate the OSD menu.
Step 2 : Press +/çor -/�key to highlight the desired
option of OSD icon.
C Step 3 : Press and release MENU key to acress the
option.The color of the inner area of the
OSD will changed from blue to green.
+/
Step 4 : To make your adjustment,press çor
-/�key to decrease the setting.
Step 5 : Press and release MENU key to store
the change.the color of the inner area will
go back to blue.You can select select other
function to make adjustment by +/çor -/�
.Also you can select exit icon or press Exit
key to exit the OSD menu.
Background ýColor Analyzer 1. Set the contrast to MAX.,Brightness to Y=0.7 Y = 0.7
White >R.G.B off set color is 9300°K using the OSD. 20.1FL
Balance (68KHz,1024x768) 2. Set the OSD to COLOR of sub menu and press x = 0.283
D Adjust knob. 20.01
3. Make the adjustment R.G.B BIAS low light to
y = 0.297
the value shown at right by using encorder. 20.01
White ýColor Analyzer 1. Move the OSD to the R.G.B. DRIVE.
Balance ýOscilloscope 2. Move the OSD to the G DRIVE and make the 37VP-P
Adjust yadjustment to the value shown at right by using
Cathode G
E encorder.
>3? block
3. Move the OSD to the R,B-DRIVE and make the x = 0.283
(68KHz,1024x768)
Adjustment to the value shown at right by using 20.01
Encorder. y = 0.297
20.01
ABL ýColor Analyzer 1. Set the contrast to MAX.,Brightness to MAX. Y = 33FL
F Adjust >Full White 2. Make the adjustment to the value shown at right
by adjustment ABL on the OSD menu.
(64KHz,1280x1024)
Other >Full White 1. Set the FREQ. to 55 (562NS)
Function (64KHz,1280x1024) 72 (777NS,772NS,572NS)
Seting 87 (786NS,787NS,986NS)
G 2. Set the OSD to PROVIEW
3. Set the BURN to Disable
4. Set the TIME to 15
5. Set the DEFO to TDA9113/9112 (786NS,787NS,986NS)
TDA9115 (772NS,572NS,562NS)
12 |
ACEC
OTHERS
