1616ENGLISHENGLISH17
C7If the shaving unit becomes detached fromDo not clean more than one cutter and comb at a
the razor, you can easily reattach it.time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
8You may also clean the hair chambercould take several weeks before optimal shaving
without water by using the supplied brush.performance is restored.
Once A Month: Razor HeadsC6Replace the set back into the Razor Head
Assembly so that the Owings� on the comb
Do not mix up the cutters and combs as thefit within the brackets located towards the
shaving performance may be adversely affected forcenter of the Assembly.
several weeks before optimal shaving performance
is restored.The set will only fit into the Razor Head Assembly
if the �wingsO are between the brackets. Make sure
1Turn razor OFF, remove the charging plugthat the two pointy edges of the head fit exactly
from the outlet and cord from the razor.into the recesses.
C2Press the razor head release button to7Repeat the process for the other two sets
open the razor head assembly.of cutters and combs.
8Replace the frame.
C3Turn the wheel counterclockwise (1) and
remove the retaining frame (2).C9Press down (1) and turn wheel clockwise
(2) until it locks into place.
C4Remove and clean one set of cutters and10Close the Razor Head Assembly.
combs at a time.
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
C5Separate the cutter from the comb and(e.g. Norelco Razor Cleaner, model RC1776, or
rinse clean under hot water.rubbing alcohol) and lubricated with Norelco
Razor Lubricant, model AL80, or one drop of
mineral oil (in the center of the head). This helps
prevent wear of the shaving heads. |
ACEC
PHILIPS
